<td>The Jolt Squeeze Moulding Machine is suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.
The Jolt Squeeze Moulding Machine own simple air control system,easy operation,flexible use and convenient repair and maintenance.
The Jolt Squeeze Moulding Machine Special Features
The Jolt Squeeze Moulding Machine Noise Controlled
The Jolt Squeeze Moluding Machine Combined Jolt Squeeze
The Jolt Squeeze Moluding Machine Accurate Centreline Draw
The Jolt Squeeze Moluding Machine Variable Jolt Timers
The Jolt Squeeze Moluding Machine Operational Roller on Pin Lift Draw
The Jolt Squeeze Moluding Machine Operational Safety Guards
The Jolt Squeeze Moulding Machine Work principle
The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. The Jolt Squeeze Molding Machine made of sand mold are good quality, the basic requirement is also lower.
The Jolt Squeeze Moulding Machine Work Technical Parameters
Max dimension of flaskmm500×400×180
Distance between worktable to pressure headmm170-190
Professional Molding Machine